dmesg - Samsung SSD 840
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.6-3-desktop (geeko@buildhost) (gcc version 5.1.1 20150713 [gcc-5-branch revision 225736] (SUSE Linux) ) #1 SMP PREEMPT Fri Aug 28 10:59:34 UTC 2015 (d867e86)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000094d6ffff] usable
BIOS-e820: [mem 0x0000000094d70000-0x0000000095d6ffff] reserved
BIOS-e820: [mem 0x0000000095d70000-0x000000009a77efff] usable
BIOS-e820: [mem 0x000000009a77f000-0x000000009ae7efff] reserved
BIOS-e820: [mem 0x000000009ae7f000-0x000000009af7efff] ACPI NVS
BIOS-e820: [mem 0x000000009af7f000-0x000000009affefff] ACPI data
BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Alienware Alienware 14/07MJ2Y, BIOS A09 04/23/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FE0000000 write-back
2 base 009B000000 mask 7FFF000000 uncachable
3 base 009C000000 mask 7FFC000000 uncachable
4 base 00FFC00000 mask 7FFFC00000 write-protect
5 base 0100000000 mask 7F00000000 write-back
6 base 0200000000 mask 7E00000000 write-back
7 base 0400000000 mask 7F80000000 write-back
8 base 045F600000 mask 7FFFE00000 uncachable
9 base 045F800000 mask 7FFF800000 uncachable
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02222000, 0x02222fff] PGTABLE
BRK [0x02223000, 0x02223fff] PGTABLE
BRK [0x02224000, 0x02224fff] PGTABLE
init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
[mem 0x45f400000-0x45f5fffff] page 2M
BRK [0x02225000, 0x02225fff] PGTABLE
init_memory_mapping: [mem 0x440000000-0x45f3fffff]
[mem 0x440000000-0x45f3fffff] page 2M
init_memory_mapping: [mem 0x420000000-0x43fffffff]
[mem 0x420000000-0x43fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x94d6ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x94bfffff] page 2M
[mem 0x94c00000-0x94d6ffff] page 4k
init_memory_mapping: [mem 0x95d70000-0x9a77efff]
[mem 0x95d70000-0x95dfffff] page 4k
[mem 0x95e00000-0x9a5fffff] page 2M
[mem 0x9a600000-0x9a77efff] page 4k
BRK [0x02226000, 0x02226fff] PGTABLE
BRK [0x02227000, 0x02227fff] PGTABLE
init_memory_mapping: [mem 0x9afff000-0x9affffff]
[mem 0x9afff000-0x9affffff] page 4k
init_memory_mapping: [mem 0x100000000-0x41fffffff]
[mem 0x100000000-0x41fffffff] page 1G
RAMDISK: [mem 0x368c4000-0x37459fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 ALWARE)
ACPI: XSDT 0x000000009AFFE210 0000C4 (v01 ALWARE ALIENWRE 00000001 01000013)
ACPI: FACP 0x000000009AFF7000 00010C (v05 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: DSDT 0x000000009AFE8000 00BD9D (v01 ALWARE ALIENWRE 00000000 ASL 00040000)
ACPI: FACS 0x000000009AF77000 000040
ACPI: SLIC 0x000000009AFFD000 000176 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: UEFI 0x000000009AFFC000 000236 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: FPDT 0x000000009AFFA000 000044 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: MSDM 0x000000009AFF9000 000055 (v03 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: ASF! 0x000000009AFF8000 0000A5 (v32 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: HPET 0x000000009AFF6000 000038 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: APIC 0x000000009AFF5000 00008C (v03 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: MCFG 0x000000009AFF4000 00003C (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 0x000000009AFE7000 000818 (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
ACPI: BOOT 0x000000009AFE5000 000028 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 0x000000009AFE4000 00029D (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
ACPI: ASPT 0x000000009AFE3000 000034 (v07 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: DBGP 0x000000009AFE2000 000034 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 0x000000009AFDB000 000539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT 0x000000009AFDA000 000AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT 0x000000009AFD6000 003276 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT 0x000000009AFD0000 003B89 (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
ACPI: WDTT 0x000000009AFD5000 000224 (v02 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: DMAR 0x000000009AFD4000 000090 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
NODE_DATA(0) allocated [mem 0x45f5e9000-0x45f5fcfff]
[ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000045f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x0000000094d6ffff]
node 0: [mem 0x0000000095d70000-0x000000009a77efff]
node 0: [mem 0x000000009afff000-0x000000009affffff]
node 0: [mem 0x0000000100000000-0x000000045f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000045f5fffff]
On node 0 totalpages: 4164892
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 9758 pages used for memmap
DMA32 zone: 624512 pages, LIFO batch:31
Normal zone: 55256 pages used for memmap
Normal zone: 3536384 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x94d70000-0x95d6ffff]
PM: Registered nosave memory: [mem 0x9a77f000-0x9ae7efff]
PM: Registered nosave memory: [mem 0x9ae7f000-0x9af7efff]
PM: Registered nosave memory: [mem 0x9af7f000-0x9affefff]
PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88045f200000 s97368 r8192 d29608 u262144
pcpu-alloc: s97368 r8192 d29608 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4099793
Policy zone: Normal
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 229376 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 249364(95%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at ../drivers/iommu/dmar.c:829 warn_invalid_dmar+0x77/0x90()
Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: Alienware; Ver: A09; Product Version: A09
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.1.6-3-desktop #1
Hardware name: Alienware Alienware 14/07MJ2Y, BIOS A09 04/23/2014
0000000000000000 ffffffff81007055 ffffffff816aa3dc ffffffff81e03db8
ffffffff81069351 0000000000000000 ffffffff81a45b07 ffffffff8222100c
ffffffff82221038 ffffffff81e03ed0 ffffffff81069412 ffffffff81a9cb78
Call Trace:
[] dump_trace+0x8c/0x350
[] show_stack_log_lvl+0x115/0x190
[] show_stack+0x21/0x50
[] dump_stack+0x47/0x67
[] warn_slowpath_common+0x81/0xb0
[] warn_slowpath_fmt_taint+0x42/0x50
[] warn_invalid_dmar+0x77/0x90
[] dmar_validate_one_drhd+0xcc/0xf0
[] dmar_walk_remapping_entries+0x85/0x1b0
[] detect_intel_iommu+0x54/0xd0
[] pci_iommu_alloc+0x4c/0x67
[] mem_init+0x12/0x9c
[] start_kernel+0x24e/0x497
[] x86_64_start_kernel+0x13f/0x14e
---[ end trace 193ab5ecf75ae135 ]---
Memory: 16298920K/16659568K available (6868K kernel code, 1116K rwdata, 5020K rodata, 1556K init, 1520K bss, 360648K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU kthread priority: 1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.440 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.88 BogoMIPS (lpj=2394440)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff8209e000 - ffffffff820a4000)
ftrace: allocating 25780 entries in 101 pages
dmar: Host address width 39
dmar: DRHD base: 0x00000000000000 flags: 0x1
dmar: parse DMAR table failure.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
#3
#4
microcode: CPU4 microcode updated early to revision 0x1c, date = 2014-07-03
#5
#6
microcode: CPU6 microcode updated early to revision 0x1c, date = 2014-07-03
#7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38311.04 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9ae7f000-0x9af7efff] (1048576 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 10:55:12, date: 09/25/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88044CF69000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88044CF7F000 0005AA (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88044CF7C800 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd2000000-0xd23fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xd2710000-0xd2713fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd2700000-0xd270ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd2718000-0xd271800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd271d000-0xd271d3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd2714000-0xd2717fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd271c000-0xd271c3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd271b000-0xd271b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd2719000-0xd27190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1969:e091] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xd2600000-0xd263ffff 64bit]
pci 0000:08:00.0: reg 0x18: [io 0x3000-0x307f]
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xd2600000-0xd26fffff]
pci 0000:09:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:09:00.0: reg 0x10: [mem 0xd2501000-0xd2501fff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D1 D2 D3hot
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:09:00.1: [10ec:5209] type 00 class 0x080500
pci 0000:09:00.1: reg 0x10: [mem 0xd2500000-0xd25000ff]
pci 0000:09:00.1: supports D1 D2
pci 0000:09:00.1: PME# supported from D1 D2 D3hot
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [mem 0xd2500000-0xd25fffff]
pci 0000:0a:00.0: [168c:0034] type 00 class 0x028000
pci 0000:0a:00.0: reg 0x10: [mem 0xd2400000-0xd247ffff 64bit]
pci 0000:0a:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [mem 0xd2400000-0xd24fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x94d70000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9a77f000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0800-0x08fe] has been reserved
system 00:00: [io 0x0900-0x09fe] has been reserved
system 00:00: [io 0x0a00-0x0afe] has been reserved
system 00:00: [io 0x0b00-0x0bfe] has been reserved
system 00:00: [io 0x1800-0x18fe] could not be reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0xfd60-0xfd63] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL05a9 PNP0f13 (active)
pnp 00:05: disabling [mem 0xffffffff-0x100000ffe] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
pnp 00:05: disabling [mem 0xffffffff-0x100000ffe disabled] because it overlaps 0000:0a:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0x9fa11000-0x9fa11fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:0a:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd1000000-0xd107ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff]
pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xd2600000-0xd26fffff]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [mem 0xd2500000-0xd25fffff]
pci 0000:0a:00.0: BAR 6: assigned [mem 0xd2480000-0xd248ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [mem 0xd2400000-0xd24fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 1 [mem 0x9fb00000-0x9fcfffff]
pci_bus 0000:07: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xd2600000-0xd26fffff]
pci_bus 0000:09: resource 1 [mem 0xd2500000-0xd25fffff]
pci_bus 0000:0a: resource 1 [mem 0xd2400000-0xd24fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:08:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 11864K (ffff8800368c4000 - ffff88003745a000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9677f000-0x9a77f000] (64MB) mapped at [ffff88009677f000-ffff88009a77efff]
Simple Boot Flag at 0x44 set to 0x1
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x1c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1443178512.783:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xd271b000 port 0xd271b100 irq 25
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xd271b000 port 0xd271b300 irq 25
ata6: SATA max UDMA/133 abar m2048@0xd271b000 port 0xd271b380 irq 25
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd271d000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.6-3-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 19, io mem 0xd271c000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.6-3-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 10
registered taskstats version 1
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 15:846:932
rtc_cmos 00:01: setting system clock to 2015-09-25 10:55:14 UTC (1443178514)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: READ LOG DMA EXT failed, trying unqueued
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM03B0Q, max UDMA/133
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 3B0Q PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata5.00: ATAPI: MATSHITA DVDRW/BDROM UJ167AM, 1.03, max UDMA/133
ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: CD-ROM MATSHITA DVDRWBD UJ167AM 1.03 PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 2394.455 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c1579c6, max_idle_ns: 440795259439 ns
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
usb 2-1.5: string descriptor 0 read error: -22
usb 2-1.5: New USB device found, idVendor=0cf3, idProduct=3004
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.7: new full-speed USB device number 4 using ehci-pci
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: READ LOG DMA EXT failed, trying unqueued
ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
ata6.00: ATA-9: Samsung SSD 840 EVO 500GB mSATA, EXT41B6Q, max UDMA/133
ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 840 1B6Q PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
usb 2-1.7: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
usb 2-1.7: New USB device found, idVendor=187c, idProduct=0525
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.7: Product: M14x
usb 2-1.7: Manufacturer: Alienware
usb 2-1.7: SerialNumber: 2.3.0
usb 1-1.4: New USB device found, idVendor=1bcf, idProduct=2b83
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Laptop_Integrated_Webcam_FHD
usb 1-1.4: Manufacturer: CKFB221F30401789C892
hid-generic 0003:187C:0525.0001: hiddev0,hidraw0: USB HID v1.01 Device [Alienware M14x] on usb-0000:00:1d.0-1.7/input0
psmouse serio1: synaptics: queried max coordinates: x [..5668], y [..4756]
psmouse serio1: synaptics: queried min coordinates: x [1274..], y [1098..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2417, fw id: 1365292
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1556K (ffffffff81f19000 - ffffffff8209e000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1312K (ffff8800016b8000 - ffff880001800000)
Freeing unused kernel memory: 1124K (ffff880001ce7000 - ffff880001e00000)
random: systemd urandom read with 14 bits of entropy available
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Unit type .busname is not supported on this system.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
systemd[1]: Starting system-systemd\x2dhibernate\x2dresume.slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting dracut cmdline hook...
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Attached scsi generic sg1 type 5
sd 5:0:0:0: Attached scsi generic sg2 type 0
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd-journald[189]: Failed to set file attributes: Inappropriate ioctl for device
systemd[1]: Started Setup Virtual Console.
audit: type=1130 audit(1443178515.758:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Create Static Device Nodes in /dev.
audit: type=1130 audit(1443178515.759:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1443178515.774:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443178515.818:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443178515.837:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443178515.840:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443178515.849:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
wmi: Mapper loaded
audit: type=1130 audit(1443178515.862:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.1.6-3-desktop xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
[drm] Initialized drm 1.1.0 20060810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.1.6-3-desktop xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
rtsx_pci 0000:09:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27
usb: failed to peer usb4-port5 and usb3-port3 by location (usb4-port5:none) (usb3-port3:usb4-port3)
usb usb4-port5: failed to peer to usb3-port3 (-16)
usb: port power management may be unreliable
usb: failed to peer usb4-port6 and usb3-port4 by location (usb4-port6:none) (usb3-port4:usb4-port4)
usb usb4-port6: failed to peer to usb3-port4 (-16)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
audit: type=1130 audit(1443178515.876:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
sdhci-pci 0000:09:00.1: SDHCI controller found [10ec:5209] (rev 1)
[drm] Replacing VGA console driver
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:09:00.1: No vmmc regulator found
sdhci-pci 0000:09:00.1: No vqmmc regulator found
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [f0:1f:af:6f:68:1a]
mmc0: SDHCI controller on PCI [0000:09:00.1] using DMA
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
alx 0000:08:00.0 enp8s0: renamed from eth0
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88044e8e6d10), AE_NOT_FOUND (20150410/psparse-536)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:00/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7240a2
nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:01:00.0] Family : NVE0
nouveau [ VBIOS][0000:01:00.0] using image from ACPI
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 80.07.9e.00.14
nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
nouveau [ VBIOS][0000:01:00.0] running init tables
PM: Starting manual resume from disk
PM: Hibernation image partition 8:3 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
raid6: sse2x1 gen() 9941 MB/s
fbcon: inteldrmfb (fb0) is primary device
raid6: sse2x1 xor() 7765 MB/s
raid6: sse2x2 gen() 12832 MB/s
raid6: sse2x2 xor() 8783 MB/s
raid6: sse2x4 gen() 15207 MB/s
raid6: sse2x4 xor() 10082 MB/s
Switched to clocksource tsc
raid6: avx2x1 gen() 19945 MB/s
raid6: avx2x2 gen() 23261 MB/s
raid6: avx2x4 gen() 27042 MB/s
raid6: using algorithm avx2x4 gen() 27042 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 33304.000 MB/sec
Btrfs loaded, assert=on
BTRFS: device fsid 2e4166a4-3496-40d0-84be-83953c4f0bb0 devid 1 transid 1191 /dev/sda1
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 600000uv
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 07: core 405 MHz memory 810 MHz
nouveau [ CLK][0000:01:00.0] 0a: core 405-1058 MHz memory 1600 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 405-1058 MHz memory 5000 MHz
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 8157400 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000fa6 0f420010
nouveau [ DRM] DCB outp 01: 02000f62 00020010
nouveau [ DRM] DCB conn 00: 00001046
nouveau E[ DRM] Pointer to flat panel table invalid
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
nouveau 0000:01:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [ IBUS ]
nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x3f800000 FAULT at 0x405804 [ IBUS ]
nouveau E[ PIBUS][0000:01:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000204
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff880036f2c800
nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on minor 1
BTRFS info (device sda1): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: detected SSD devices, enabling SSD mode
systemd-journald[189]: Received SIGTERM from PID 1 (systemd).
systemd-sysv-generator[509]: Overwriting existing symlink /run/systemd/generator.late/pppoe.service with real service
systemd-sysv-generator[509]: Overwriting existing symlink /run/systemd/generator.late/cifs.service with real service
systemd-sysv-generator[509]: Overwriting existing symlink /run/systemd/generator.late/halt.local.service with real service
systemd-sysv-generator[509]: Overwriting existing symlink /run/systemd/generator.late/ebtables.service with real service
systemd-sysv-generator[509]: Overwriting existing symlink /run/systemd/generator.late/raw.service with real service
systemd-sysv-generator[509]: Overwriting existing symlink /run/systemd/generator.late/local.service with real service
systemd-sysv-generator[509]: Overwriting existing symlink /run/systemd/generator.late/postgresql.service with real service
systemd-sysv-generator[509]: Overwriting existing symlink /run/systemd/generator.late/after.local.service with real service
systemd-sysv-generator[509]: Overwriting existing symlink /run/systemd/generator.late/rpmconfigcheck.service with real service
BTRFS info (device sda1): disk space caching is enabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC ie31200: No ECC support
ACPI: AC Adapter [ACAD] (on-line)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
ACPI Warning: SystemIO range 0x0000000000005040-0x000000000000505F conflicts with OpRegion 0x0000000000005040-0x000000000000504F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input8
Linux video capture interface: v2.00
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iTCO_vendor_support: vendor-support=0
input: Dell WMI hotkeys as /devices/virtual/input/input9
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (1bcf:2b83)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3661: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x15/0x16/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Adding 16779260k swap on /dev/sda3. Priority:-1 extents:1 across:16779260k SSFS
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90002b00000, irq=16
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
usbcore: registered new interface driver ath3k
ath9k 0000:0a:00.0 wlp10s0: renamed from wlan0
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (sdb1): Mounting V5 Filesystem
XFS (sda2): Mounting V5 Filesystem
ACPI: Battery Slot [BAT1] (battery present)
usb 2-1.5: USB disconnect, device number 3
random: nonblocking pool is initialized
usb 2-1.5: new full-speed USB device number 5 using ehci-pci
usb 2-1.5: string descriptor 0 read error: -22
usb 2-1.5: New USB device found, idVendor=0cf3, idProduct=3004
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
XFS (sdb1): Ending clean mount
XFS (sda2): Ending clean mount
audit_printk_skb: 198 callbacks suppressed
audit: type=1400 audit(1443178519.760:67): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=804 comm="apparmor_parser"
audit: type=1300 audit(1443178519.760:67): arch=c000003e syscall=1 success=yes exit=1801 a0=4 a1=93cc10 a2=709 a3=59 items=0 ppid=519 pid=804 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
audit: type=1327 audit(1443178519.760:67): proctitle=2F7362696E2F61707061726D6F725F706172736572002D492F6574632F61707061726D6F722E64002D2D616464002F6574632F61707061726D6F722E642F7573722E6C69622E617061636865322E6D706D2D707265666F726B2E61706163686532
audit: type=1400 audit(1443178519.760:68): apparmor="STATUS" operation="profile_load" name="DEFAULT_URI" pid=804 comm="apparmor_parser"
audit: type=1300 audit(1443178519.760:68): arch=c000003e syscall=1 success=yes exit=1817 a0=4 a1=93d420 a2=719 a3=0 items=0 ppid=519 pid=804 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
audit: type=1327 audit(1443178519.760:68): proctitle=2F7362696E2F61707061726D6F725F706172736572002D492F6574632F61707061726D6F722E64002D2D616464002F6574632F61707061726D6F722E642F7573722E6C69622E617061636865322E6D706D2D707265666F726B2E61706163686532
audit: type=1400 audit(1443178519.760:69): apparmor="STATUS" operation="profile_load" name="HANDLING_UNTRUSTED_INPUT" pid=804 comm="apparmor_parser"
audit: type=1300 audit(1443178519.760:69): arch=c000003e syscall=1 success=yes exit=1833 a0=4 a1=93d420 a2=729 a3=0 items=0 ppid=519 pid=804 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
audit: type=1327 audit(1443178519.760:69): proctitle=2F7362696E2F61707061726D6F725F706172736572002D492F6574632F61707061726D6F722E64002D2D616464002F6574632F61707061726D6F722E642F7573722E6C69622E617061636865322E6D706D2D707265666F726B2E61706163686532
audit: type=1400 audit(1443178519.760:70): apparmor="STATUS" operation="profile_load" name="phpsysinfo" pid=804 comm="apparmor_parser"
systemd-journald[833]: Received request to flush runtime journal from PID 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
fuse init (API version 7.23)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
alx 0000:08:00.0 enp8s0: NIC Up: 1 Gbps Full
NET: Registered protocol family 17
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0xbadf1008 FAULT at 0x419cc0 [ IBUS ]
nouveau E[ PIBUS][0000:01:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000204
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x71a9[0]: script needs connector type
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)